加拿大家园论坛

2013年技工新政

原文链接:https://forum.iask.ca/threads/619766/

xxjal2000 : 2013-01-02#1
其他条件不难,职业认证,请讨论!

tony9721 : 2013-01-02#2
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

谢谢,好

hiju : 2013-01-02#3
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

没有雇主的很难职业认证吧?

有雇主的技工,家里没点儿这边的内部关系,几乎没可能。

tony9721 : 2013-01-02#4
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

中介会有人操作这个的,以后自己DIY越来越难了

Aftertears : 2013-01-02#5
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

做个记号,静待后续反应。。

xxjal2000 : 2013-01-02#6
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

没有雇主的很难职业认证吧?

有雇主的技工,家里没点儿这边的内部关系,几乎没可能。

如果有人知道怎么DIY职业认证,麻烦分享一下方法啊,毕竟这是一个DIY论坛,多谢先啊!

hiju : 2013-01-02#7
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

电工姐姐呢?修车飘大叔呢?还有曾经想转管道工的71班长呢?

赶紧拿下证书,带学徒呀!

国内这么多资源,都指着你们给带过去呢,快呀!

赶紧一起办个学徒公司。

newdream : 2013-01-02#8
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

电工姐姐呢?修车飘大叔呢?还有曾经想转管道工的71班长呢?

赶紧拿下证书,带学徒呀!

国内这么多资源,都指着你们给带过去呢,快呀!

赶紧一起办个学徒公司。
要offer的就不那么容易呀班长 带徒弟还得配合英文培训外加联系雇主。。长期操作省提名帮找雇主的中介已经早占领雇主资源了吧

hiju : 2013-01-02#9
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

CLB5,英语都能ELT了。

都带学徒了,不是雇主吗?

要offer的就不那么容易呀班长 带徒弟还得配合英文培训外加联系雇主。。长期操作省提名帮找雇主的中介已经早占领雇主资源了吧

bhb : 2013-01-02#10
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

肯定会出来怎么评估的要求的。

Nebula.Trek : 2013-01-02#11
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

先办理留学,然后立刻参加省级技工考试,之后移民,退学。

love158815 : 2013-01-02#12
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

good.

lovelysheep : 2013-01-02#13
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

建议挨个省份明确能否直接用海外经验考取资格。
不行的话,找中介吧。

popiston : 2013-01-02#14
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

如果有人知道怎么DIY职业认证,麻烦分享一下方法啊,毕竟这是一个DIY论坛,多谢先啊!
感觉还是中介的多,论坛也是中介在支撑。

wisezmz : 2013-01-02#15
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

先办理留学,然后立刻参加省级技工考试,之后移民,退学。

一年才3000名额,等你搞好了,坑早被占满了。

bhb : 2013-01-02#16
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

技术认证或雇用证明 二选一
移民部指出,“跨省标准红印章计划”(Interprovincial Standards Red Seal Program)即为三级政府与52个工种合作,为统一技术行业标准而设立的。申请者可笔试通过“跨省标准红印章测试”的多项选择题试卷,获得资格认证
移民部指出,由于技工认证及学徒训练是省级政府的管辖范围,因此,由省级政府发出“资格证书”是证明申请人工作能力的最佳证明方式。但如果是不在专业规范的技工,则需要雇主发出的雇用证明。

Aftertears : 2013-01-03#17
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

技术认证或雇用证明 二选一
移民部指出,“跨省标准红印章计划”(Interprovincial Standards Red Seal Program)即为三级政府与52个工种合作,为统一技术行业标准而设立的。申请者可笔试通过“跨省标准红印章测试”的多项选择题试卷,获得资格认证
移民部指出,由于技工认证及学徒训练是省级政府的管辖范围,因此,由省级政府发出“资格证书”是证明申请人工作能力的最佳证明方式。但如果是不在专业规范的技工,则需要雇主发出的雇用证明。

笔试??哼哼,我朝人民的强项,莫非是要绝境逢生了?:wdb23:

tony9721 : 2013-01-03#18
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

先办理留学,然后立刻参加省级技工考试,之后移民,退学。

这。。。。。。。。。。。

bhb : 2013-01-03#19
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

笔试??哼哼,我朝人民的强项,莫非是要绝境逢生了?:wdb23:
关键笔试得去加拿大吧?!

JULI98 : 2013-01-03#20
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

哪有那么容易,我家过去了,当地电工证书还没有弄到呢,还在啃英文,等着读SAIT ,然后学徒呢.大概每个省不同,有人直接考了证?

tony9721 : 2013-01-03#21
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

哪有那么容易,我家过去了,当地电工证书还没有弄到呢,还在啃英文,等着读SAIT ,然后学徒呢.大概每个省不同,有人直接考了证?
我觉得这个非常有参考价值,因为过去了如果都难拿到技工的证明,,
那我们这些没有过去的怎么办:wdb14:

bhb : 2013-01-03#22
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

我觉得这个非常有参考价值,因为过去了如果都难拿到技工的证明,,
那我们这些没有过去的怎么办:wdb14:
加拿大都说降低标准以得到大批技工,要是雇主合同或资格认证无法让大多数人顺利得到,那就失去意义了,估计别的国家的技工移民也不好拿到这2选1.所以,几天后,肯定会出一个详细的2选1的准则与说明。

shudong : 2013-01-03#23
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

我的加拿大当地移民律师知道怎么职业资格认证,你可以发邮件到她邮箱问她:
lofterbox@aol.com,费用好像是1000-3000加元左右。

梦加园 : 2013-01-03#24
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

大家好,有雇主信。英文完全不行,你们看能过去吗?11年11月与中介签约BC省,至今末递表。

lyffeng : 2013-01-03#25
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

加拿大都说降低标准以得到大批技工,要是雇主合同或资格认证无法让大多数人顺利得到,那就失去意义了,估计别的国家的技工移民也不好拿到这2选1.所以,几天后,肯定会出一个详细的2选1的准则与说明。

不是说加拿大的技校只接收本地人或有永居卡的人,不收国际学生,这样留学也没有用处

tony9721 : 2013-01-03#26
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

我的加拿大当地移民律师知道怎么职业资格认证,你可以发邮件到她邮箱问她:
lofterbox@aol.com,费用好像是1000-3000加元左右。
最好不要在发此类信息,谢谢

2008k : 2013-01-03#27
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

当地时间2013-01-02,移民局公布联邦技工新政细则:
*其中语言要求是:听说CLB5级,读写CLB4级,分别对应雅思听5.0,说5.0,读3.5、写4.0。
*职业要求(NOC code)必须以下:
Group A – Jobs with sub-caps of 100 applications each (and their corresponding 2011 NOC code)

7202 Contractors and supervisors, electrical trades and telecommunications occupations
7204 Contractors and supervisors, carpentry trades
7205 Contractors and supervisors, other construction trades, installers, repairers and servicers
7271 Carpenters
7301 Contractors and supervisors, mechanic trades
7302 Contractors and supervisors, heavy equipment operator crews
8211 Supervisors, logging and forestry
8221 Supervisors, mining and quarrying
8222 Contractors and supervisors, oil and gas drilling services
8241 Logging machinery operators
8252 Agricultural service contractors, farm supervisors and specialized livestock workers
9211 Supervisors, mineral and metal processing
9212 Supervisors, petroleum, gas and chemical processing and utilities
9214 Supervisors, plastic and rubber products manufacturing
9231 Central control and process operators, mineral and metal processing
9241 Power engineers and power systems operators
9243 Water and waste treatment plant operators
Group B – no sub-caps (2011 NOC code)

7231 Machinists and machining and tooling inspectors
7233 Sheet metal workers
7235 Structural metal and plate work fabricators and fitters
7236 Ironworkers
7237 Welders and related machine operators
7241 Electricians (except industrial and power system)
7242 Industrial electricians
7243 Power system electricians
7244 Electrical power line and cable workers
7245 Telecommunications line and cable workers
7246 Telecommunications installation and repair workers
7251 Plumbers
7252 Steamfitters, pipefitters and sprinkler system installers
7253 Gas fitters
7311 Construction millwrights and industrial mechanics
7312 Heavy-duty equipment mechanics
7313 Refrigeration and air conditioning mechanics
7314 Railway carmen/women
7315 Aircraft mechanics and aircraft inspectors
7318 Elevator constructors and mechanics
7371 Crane operators
7372 Drillers and blasters - surface, mining, quarrying and construction
7373 Water well drillers
8231 Underground production and development miners
8232 Oil and gas well drillers, servicers, testers and related workers
9232 Petroleum, gas and chemical process operators

*至少2年相关工作经验;
*有雇主或者职业资格。
*工作时间上的要求,这个自己看吧

其中大家最关心也是最坑爹的是雇主或者职业资格吧,有了雇主当然好办啦,没有雇主的只能签个旅游签去办职业认证吧,哈哈,对于职业资格认证,大家都可以出出主意吧,不然技工就全挂看了。
对于职业资格认证,因为非常重要,我另外开贴讨论:
2013联邦技工职业资格认证:
http://forum.iask.ca/showthread.php?p=8740052#post8740052




原文及链接:
http://www.cic.gc.ca/english/immigrate/trades/apply-who.asp
Determine your eligibility — Skilled trades
The Federal Skilled Trades Program is for people who want to become permanent residents based on being qualified in a skilled trade.

Note: to avoid backlogs and ensure fast processing times, we will accept no more than 3,000 complete applications for processing in the first year (from January 2, 2013 to January 1, 2014).

Within the 3,000 cap, no more than 100 new applications for certain jobs will be considered for processing each year. There is no sub-cap for other skilled trades. See which applications we are currently accepting.

To apply, you must:

plan to live outside the province of Quebec (Note: The province of Quebec chooses its own skilled workers. If you plan on living in Quebec, see Quebec-selected skilled workers for more information),
meet the required levels in English or French for each language ability (speaking, reading, writing, and listening),
have at least two years of full-time work experience (or an equal amount of part-time work experience)* in a skilled trade within the five years before you apply,
meet all job requirements for that skilled trade as set out in the National Occupational Classification (NOC), and
have an offer of full-time employment for a total period of at least one year** or a certificate of qualification in that skilled trade issued by a provincial or territorial body.
*“Full-time work” means at least 30 hours of work over a period of one week, or an equal amount in part-time, paid work experience. For example:

if you worked 15 hours per week in one job over four years, or
if you worked a total of 30 combined hours per week in more than one job over two years.
**Up to two employers can commit to employing you for at least one year of continuous full-time work, meaning at least 30 hours of work over a period of one week.

National Occupation Classification (NOC) requirements

Skilled Trades currently eligible for the FSTP are organized under these major groups of the NOC:

Major Group 72, industrial, electrical and construction trades,
Major Group 73, maintenance and equipment operation trades,
Major Group 82, supervisors and technical jobs in natural resources, agriculture and related production, and
Major Group 92, processing, manufacturing and utilities supervisors and central control operators.
These major NOC groups are subdivided into different occupations. In total, 43 jobs (with specific NOC codes) will be eligible to apply under the FSTP in the first year of the program. We will accept no more than 100 applications for certain occupations. Other jobs do not have a limit of 100. See which applications we are accepting.

FSTP applications must be made based on the 2011 version of the NOC. However, if the application includes a Labour Market Opinion from Human Resources and Skills Development Canada based on the 2006 version of the NOC, it will be accepted by CIC as long as the applicant’s occupation corresponds to a 2011 NOC code that is eligible for the program.

Language testing

You must show you meet the minimum requirements in English or French for each of the four language abilities:

reading,
writing,
speaking, and
listening.
To do this, you must take an English or French language test from an organization approved by CIC. You must then include the results of your test with your application.

Inadmissibility

Some people are inadmissible—they are not allowed to come to Canada. Several things can make you inadmissible, such as being involved in criminal activity, in human rights violations or in organized crime.

You can also be inadmissible for security, health or financial reasons. Find out more about inadmissibility.

Do not apply under the Federal Skilled Trades Program if you are not admissible to Canada.

If you are not sure if you should apply as a skilled trades worker, try the Come to Canada Wizard to find out if you would be eligible.


技工A 类每项职业限额100 共1700 , 余下1300另外26项去残杀!!!

hncslx : 2013-01-03#28
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

严重怀疑肥康跟中介公司是暗地里勾结一起的,出这个政策不是摆明了让中介公司卖offer嘛

perfect891 : 2013-01-03#29
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

谁知道“职业资格”认证的办理程序与要求?

perfect891 : 2013-01-03#30
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

我是:7246 Telecommunications installation and repair workers 这一类的,谁能协助我办理?无论中介还是个人,请联系我

perfect891 : 2013-01-04#31
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

不是说加拿大的技校只接收本地人或有永居卡的人,不收国际学生,这样留学也没有用处
你说的对,我也曾获知这样的信息。所以大家做决策是要醒目,小心上当!

tony9721 : 2013-01-04#32
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

如果留学的目的是为了移民,
这个确实有一定的风险,最起码,你现在符合条件不一定等你毕业就继续符合
毕竟 康尼可以改变规则,那么其他的部长同样也可以改变规则,
所以,大家还是要谨慎

hollwang : 2013-01-04#33
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

技工类其实最难招到了, 技术好的,很多英语就不行了

tony9721 : 2013-01-04#34
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

确实楼上所说

Nebula.Trek : 2013-01-04#35
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

一年才3000名额,等你搞好了,坑早被占满了。
我们这里报纸说明年6000,后年9000,一直提高到3万为止.

Nebula.Trek : 2013-01-04#36
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

不是说加拿大的技校只接收本地人或有永居卡的人,不收国际学生,这样留学也没有用处
技工属于college,加拿大多数省的多数专业,都招收留学生.

少数特别好的专业,只招收加拿大公民和已经有枫叶卡的移民.

Nebula.Trek : 2013-01-04#37
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

college多数专业都接受留学生.

本地人上的学徒工,就是一年上2个月课程,其余时间工作的那种,必须加拿大人或者加入学徒国家列表的才可以,学徒国家列表就是北欧+德国+法国.

Nebula.Trek : 2013-01-04#38
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

技工的红印执照的话,英语和技术都准备好,也要几个月才能考过,甚至有人考了6个月到半年还没通过.

目前针对中国还没有免试直接评估的. 换句话说,中国人是要评估后参加考试的.

加拿大外没有考点.

Nebula.Trek : 2013-01-04#39
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

我的澳洲技工证书, 在本地只需要参加加拿大安全培训36小时就可以换加拿大省级别证书的,但是我因为不打算继续做技工了,所以没有换加拿大证书.

Nebula.Trek : 2013-01-04#40
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

Coming to Canada

Q: I am a certified tradesperson and am planning to move to Canada shortly. Will my work experience allow me to work in my trade when I arrive?A: Training and certification of skilled workers in Canada are responsibilities delegated to each of the thirteen provinces and territories. As such, it would be useful to know within which jurisdiction you plan on settling, in which case you should direct your specific question to the apprenticeship office for the province or territory in which you plan to work. The National Occupational Analysis is a good document to compare out of Canada trade experience against tasks performed in the trade in Canada.Q: Who should I contact to obtain information on immigration procedures?A: Contact the Canadian embassy or consulate nearest you or visit the Canadian Representation Abroad Website. to find out the exact location of the Canadian mission nearest you. You can also visit the Citizenship and Immigration Canada Web site or the Going to Canada portal.

Nebula.Trek : 2013-01-04#41
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

红印网站上说,移民请各自联系要去的地方的机构办理执照,这意思可能是每个省办理方式不同.

Nebula.Trek : 2013-01-04#42
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

There are two ways to obtain a Certificate of Qualification and become a certified journeyperson in Nova Scotia:
1. Challenge the Certification Exam as a Trade Qualifier
2. Complete an Apprenticeship Program
Click here for a process map or continue reading the information below.

1. Challenge the Red Seal Exam as a Trade Qualifier (TQ) - Requires significant experience
If you have significant experience working hands-on in one of Nova Scotia’s designated trades and can prove that your skills and work experience meet the standards set for a certified skilled tradesperson in Nova Scotia, you may be approved to write the Red Seal Exam through the Trade Qualification Program (the cost for the program is $679.78 Canadian). If you apply under this program, you will need letters of reference from two qualified trades people, as well as letters from employers proving you have completed the required number of hours of hands-on work in the trade. The required number of hours for this program is specified in the trade regulations governing each trade.
2. Complete an Apprenticeship Program - Requires an employer
Whether you have significant, some or even no prior work experience or formal trades training, apprenticeship training is an excellent option to consider. To begin an apprenticeship program, you must find an employer willing to hire you and agree to have you registered as an apprentice.
Most apprenticeship programs take three to four years to complete (time may be reduced if credit is awarded for prior work experience and training). As an apprentice, you will learn the skills of the trade under the supervision of a certified journeyperson and accumulate the required on-the-job hours in your place of employment. As well, you will attend technical (in-school) training on an annual basis.
Based on your prior work experience and training, you may be eligible to receive advanced standing in the apprenticeship program (up to and including credit for all of the required on-the-job hours and exemption from technical training). Challenge exams may be required to determine your placement within the program.

Please note: Completing an apprenticeship program may be the best option if you have significant work experience and training, but feel you are not ready to write the certification exam. It can provide you with the opportunity to work in your trade and have access to subsidized technical training, if required, before you write the certification exam.

Nebula.Trek : 2013-01-04#43
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

大体看了下各个省的技工红印证书评估,发现除了魁北克,其他地方都一个样:

红印证书是熟练工证书.

1,有经验的,直接参加考试,通过了就算熟练工证书.
参加考试需要两个熟练工介绍信,外加以前所有雇主的介绍信,或者工作时间证明.一般职业都需要工作至少3-5年,至少4500-7000小时

2,没有经验的,或者有经验但是因为语言不好等原因无法参加考试的的,直接参加学徒,随时考试.
3,没有经验的,参加学徒,3-4年后考试.


附注:
文中学徒工,和全日制技工学生不同.学徒工直接带工资.

Nebula.Trek : 2013-01-04#44
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

看各省评估网站,是外国人只要交纳700加币左右,也可以评估的. 条件是有两个加拿大技工介绍信,这个不难.

难得是,评估后要来加拿大考试,旅游签证如果没有及时搞到,就等于赔了700加币.

tony9721 : 2013-01-04#45
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

谢谢楼上,管用

shijieduoduo : 2013-01-04#46
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

大体看了下各个省的技工红印证书评估,发现除了魁北克,其他地方都一个样:

红印证书是熟练工证书.

1,有经验的,直接参加考试,通过了就算熟练工证书.
参加考试需要两个熟练工介绍信,外加以前所有雇主的介绍信,或者工作时间证明.一般职业都需要工作至少3-5年,至少4500-7000小时

2,没有经验的,或者有经验但是因为语言不好等原因无法参加考试的的,直接参加学徒,随时考试.
3,没有经验的,参加学徒,3-4年后考试.


附注:
文中学徒工,和全日制技工学生不同.学徒工直接带工资.
请问 如果工作经验没有3年 但是有5000小时 可以申请参加考试吗 还有您说的那个直接参加学徒是什么意思 ? 还有着信息您是那个网站看的 可以提供下吗 还有那个加拿大的推荐信怎么获得 找中介吗?

shijieduoduo : 2013-01-04#47
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

看各省评估网站,是外国人只要交纳700加币左右,也可以评估的. 条件是有两个加拿大技工介绍信,这个不难.

难得是,评估后要来加拿大考试,旅游签证如果没有及时搞到,就等于赔了700加币.
那外国人评估 需要什么要求 也是工作经验吗?本地国的工作经验? 还是说有推荐信 就可以?

hiju : 2013-01-04#48
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

家园出人才。连技工证书都门清!太强了,不佩服不行:wdb17::wdb17::wdb17::wdb17::wdb17:

perfect891 : 2013-01-04#49
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

大体看了下各个省的技工红印证书评估,发现除了魁北克,其他地方都一个样:

红印证书是熟练工证书.

1,有经验的,直接参加考试,通过了就算熟练工证书.
参加考试需要两个熟练工介绍信,外加以前所有雇主的介绍信,或者工作时间证明.一般职业都需要工作至少3-5年,至少4500-7000小时

2,没有经验的,或者有经验但是因为语言不好等原因无法参加考试的的,直接参加学徒,随时考试.
3,没有经验的,参加学徒,3-4年后考试.


附注:
文中学徒工,和全日制技工学生不同.学徒工直接带工资.
据我获得是信息,相关学校是不收外国人作为学徒的。外国人是不能合法工作的,所以也无法开介绍信。所以对于准备移民的技工,其实这些条件是不可逾越的。根本就是没门!加拿大政府其实是拒绝收任何技工,规定本身就是互相抵触的

Nebula.Trek : 2013-01-04#50
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

那外国人评估 需要什么要求 也是工作经验吗?本地国的工作经验? 还是说有推荐信 就可以?

国外工作经验即可评估,考试要必须在加拿大。

Nebula.Trek : 2013-01-04#51
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

据我获得是信息,相关学校是不收外国人作为学徒的。外国人是不能合法工作的,所以也无法开介绍信。所以对于准备移民的技工,其实这些条件是不可逾越的。根本就是没门!加拿大政府其实是拒绝收任何技工,规定本身就是互相抵触的

是无工作经验的,才需要做学徒。

有工作经验的直接评估,无需做学徒。

网站上没说需要移民身份,估计外国人可以直接评估。

留学确实不能做学徒,只能学全日制college技工。

Nebula.Trek : 2013-01-04#52
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

加拿大各大城市,特别是资源三省和魁省到处都是留学生在学技工。

Nebula.Trek : 2013-01-04#53
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

各省红印技工熟练工资格评估网站(除了魁北克自己搞一套,其他省基本都一样: 1,直接考试,2,或者直接做学徒,3,或者上全日制技工学校)

http://www.red-seal.ca/c.4nt.1cts@-eng.jsp?#contact_

Nebula.Trek : 2013-01-04#54
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

刚才又阅读另外几个省评估条例,新发现:

安省和bc省应该是要求必须有加拿大社会保障卡号码才行(临时居民没有,移民和部分学生才有)。

其余几个省还还没发现有这个要求。
这是阿省的,写的最详细:
http://tradesecrets.alberta.ca/experiencedworkers/

萨省:
评估考试:
http://www.saskapprenticeship.ca/forms/
国外技工评估+申请萨省工签,移民一条论指导:
http://www.saskapprenticeship.ca/client-groups/internationally-trained-workers/

lyffeng : 2013-01-05#55
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

谢谢你的保贵信息,我想咨询的现在学徒是只限加拿大公民或居民加上学徒国家才可以,这是不是意味着中国人不能走学徒移民,只有留学读技工college或者是有经验、英语好直接考取技工证书,这两种方式

lyffeng : 2013-01-05#56
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

刚才又阅读另外几个省评估条例,新发现:

安省和bc省应该是要求必须有加拿大社会保障卡号码才行(临时居民没有,移民和部分学生才有)。

其余几个省还还没发现有这个要求。
这是阿省的,写的最详细:
http://tradesecrets.alberta.ca/experiencedworkers/

萨省:
评估考试:
http://www.saskapprenticeship.ca/forms/
国外技工评估+申请萨省工签,移民一条论指导:
http://www.saskapprenticeship.ca/client-groups/internationally-trained-workers/


谢谢你的保贵信息,我想咨询的现在学徒是只限加拿大公民或居民加上学徒国家才可以,这是不是意味着中国人不能走学徒移民,只有留学读技工college或者是有经验、英语好直接考取技工证书,这两种方式

lyffeng : 2013-01-05#57
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

各省红印技工熟练工资格评估网站(除了魁北克自己搞一套,其他省基本都一样: 1,直接考试,2,或者直接做学徒,3,或者上全日制技工学校)

http://www.red-seal.ca/c.4nt.1cts@-eng.jsp?#contact_

我还想咨询一些问题,就是留学读技工学院是否和读其它学校一些需要保证金,和大量的时间和金钱,毕竟一位中国工人真的没有太多资金去承担高昂的学费和生活费,谢谢。

Nebula.Trek : 2013-01-05#58
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

目前,曼省等少数几个省规定,技工college留学后,如果在本省移民,退换学费。

但是几年后,不一定这个政策依然延续。

如果身体特别好,学技工可以半工半读,花费少,考雅思无需资金担保即可留学。

如果身体不好,多数技工很难找到工作,出去电工等纯技术工,其余多数技工都是需要极好的体力的。

whitehawk : 2013-01-05#59
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

请问“外国工作经验评估”一定要有外国的职业资格证书吗?

比如,在国内的厂子里做电工,有合同和每个月的工资单可以证明工作经历和时间长度,但是没有国内的电工证。没有电工证能作这个“外国工作经验评估”吗?
谢谢指教!

xxjal2000 : 2013-01-06#60
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

先办理留学,然后立刻参加省级技工考试,之后移民,退学。

这个太曲折了,不太现实啊!

xxjal2000 : 2013-01-06#61
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

关键笔试得去加拿大吧?!

去加拿大考试,太坑爹了吧,这该死的康肥猪想的鬼主意!

JULI98 : 2013-01-06#62
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

求教阿尔贝塔省如何认证,我家是中国持证电工,但英文是5.5.目前刚做学历认证。还没有拿到认证,要8周。正在读LINC

xxjal2000 : 2013-01-06#63
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

求教阿尔贝塔省如何认证,我家是中国持证电工,但英文是5.5.目前刚做学历认证。还没有拿到认证,要8周。正在读LINC

学历认证没用啊,要职业认证,目前还没人搞定,估计得走中介了,中介笑了

JULI98 : 2013-01-06#64
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

910 的人让先认证学历,我估计是看我们在中国读的是否是技工课程。

tony9721 : 2013-01-06#65
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

这个帖子改名好啊

xxjal2000 : 2013-01-06#66
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

这个帖子改名好啊

早啊,托神:wdb23:

lovelysheep : 2013-01-07#67
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

支持一下,进展不错。

lovelysheep : 2013-01-07#68
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

提醒一下,想留学然后考试,再退学移民的路是走不通的,康胖子刚出来政策针对假留学的。

Nebula.Trek : 2013-01-07#69
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

提醒一下,想留学然后考试,再退学移民的路是走不通的,康胖子刚出来政策针对假留学的。

是先来留学,移民后退学,不是退学后搞移民。

pangda : 2013-01-07#70
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

大家小心了,刚才我讲了几句真话就被踢出群了,
2013联邦技工新政群:147855695
大家小心被骗,加拿大骗子多,什么人也别相信,已官方网站的说法为准,其他都是扯淡,要是网站也看不懂,那我看你雅思也考不过,就别来了。

pangda : 2013-01-07#71
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

阿省网站上说不用考试,可下载的申请表中有写要考试,评估加考试60加币,好像两次靠不过取消资格,有些行业还有靠实践,比如修车,木匠,理发和焊接等等

lovelysheep : 2013-01-08#72
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

是先来留学,移民后退学,不是退学后搞移民。

估计移民后,学也读完了,呵呵。

jzb_jili : 2013-01-09#73
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

这个能有人投吗?

ryan : 2013-01-09#74
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

工作经验指的是国内还是加拿大的呀

xxjal2000 : 2013-01-09#75
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

工作经验国内国外都可以。

lyffeng : 2013-01-12#76
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

这样子技工移民对中国人来说太难了,一般中国工人能申请签证到加拿大考试吗,留学更加没有可能,一般技工收入低或者高历低根本达不到留学条件,唉~~~难度我的移民梦真的想破碎

lyffeng : 2013-01-12#77
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

去加拿大考试,太坑爹了吧,这该死的康肥猪想的鬼主意!

还有一个难题,就是这个资格证的考试难度,有多少中国技工能通过,如果没有到当地学习过,根本不具备应付这个考试的专业知识和英语水平

bhb : 2013-01-12#78
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

还有一个难题,就是这个资格证的考试难度,有多少中国技工能通过,如果没有到当地学习过,根本不具备应付这个考试的专业知识和英语水平
一个中介说,根本不需要考试,因为你没有签证。

xxjal2000 : 2013-01-12#79
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

一个中介说,根本不需要考试,因为你没有签证。

我也觉得不用去当地考试,来回一趟也不少钱啊,再说加拿大的旅游签证哪里那么好办。太不靠谱了。

lyffeng : 2013-01-12#80
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

一个中介说,根本不需要考试,因为你没有签证。

照这样仁兄的见解应该现在技工移民信息还不是很完整,有待等候

lyffeng : 2013-01-12#81
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

我也觉得不用去当地考试,来回一趟也不少钱啊,再说加拿大的旅游签证哪里那么好办。太不靠谱了。

这个技工移民真的太折腾:wdb14:

xxjal2000 : 2013-01-12#82
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

看前面业余格斗士的回帖:“一年才3000名额,等你搞好了,坑早被占满了。”

bhb : 2013-01-13#83
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

兄弟们,技工到底咋整?

xiaoyueliang : 2013-01-14#84
回复: 【43项紧缺职业】2013年1月2号联邦技工新政妥投统计

请问 问什么 我被移出qq群了??

ketty1210 : 2013-01-14#85
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

笔试??哼哼,我朝人民的强项,莫非是要绝境逢生了?:wdb23:
没那么美的事,很多专业要求现场操作:wdb14:

ketty1210 : 2013-01-14#86
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

这个技工移民真的太折腾:wdb14:

开拓者总是困难重重的,很多细节性的政策,觉得胖子以后会逐步完善:wdb23:

lyffeng : 2013-01-17#87
回复: 当地时间2013-01-02,移民局公布联邦技工新政细则如下:

开拓者总是困难重重的,很多细节性的政策,觉得胖子以后会逐步完善:wdb23:

:wdb11:,不过我对这个技工移民不太看好。

tony9721 : 2013-01-17#88
回复: 技工国内基本没人合格,请取消此帖置顶,让其下沉,谢谢!

暂时保留吧,可能刚开始,大家都处于混沌中,在等等

pangda : 2013-02-19#89
回复: 2013年技工新政

*** In Canada, only the provinces and territories can issue Certificates of Qualification in the skilled trades. To get this certificate, the provincial or territorial trades authority must assess your training, trade experience and skills to decide if you are eligible to write an exam to be certified.

You will likely have to go to the province or territory to be assessed. You may also need an employer in Canada to give you experience and training.

You should go to the website of the body that governs trades for the province/territory where you would like to live and work. The process is different depending on where you want to go.

Each website has more details about whether you need a certificate of qualification to work there in a specific skilled trade, and what you have to do to get one.